![Jordan Is Novice](/img/default-banner.jpg)
- 279
- 410 955
Jordan Is Novice
United States
Приєднався 22 чер 2011
Sharing C6 Corvette, home DIY projects, and other mini-projects/goals in my life.
I do trackdays in my Corvette and share videos of me driving and learning as well as upgrading or maintaining the car.
I also enjoying doing home DIY projects to help use my house better or improve my quality of life at home.
I do trackdays in my Corvette and share videos of me driving and learning as well as upgrading or maintaining the car.
I also enjoying doing home DIY projects to help use my house better or improve my quality of life at home.
C6 Corvette - Remove Starter
Learn how to remove the starter on a C6 Corvette with our step-by-step routine maintenance guide. In this video, we'll walk you through the process, providing tips and tools you'll need to efficiently and safely remove and replace the starter. Perfect for DIY enthusiasts and Corvette owners looking to perform their own maintenance.
🔧 Tools Needed:
Socket set
Wrenches
Jack stands
Screwdriver set
📌 Steps Covered:
Preparing the Corvette for starter removal
Locating the starter on a C6 Corvette
Disconnecting the battery
Removing the starter bolts
Detaching electrical connections
Removing the old starter
Installing the new starter
📅 Routine Maintenance Tips:
Check your starter regularly for signs of wear
Ensure all connections are secure after installation
Test the new starter before completing the job
👉 Subscribe for More Automotive Tutorials: [Your Channel Link]
🔔 Turn on notifications so you never miss a new video!
#C6Corvette #StarterRemoval #RoutineMaintenance #DIYCarRepair #CorvetteMaintenance #AutomotiveTutorial
🔧 Tools Needed:
Socket set
Wrenches
Jack stands
Screwdriver set
📌 Steps Covered:
Preparing the Corvette for starter removal
Locating the starter on a C6 Corvette
Disconnecting the battery
Removing the starter bolts
Detaching electrical connections
Removing the old starter
Installing the new starter
📅 Routine Maintenance Tips:
Check your starter regularly for signs of wear
Ensure all connections are secure after installation
Test the new starter before completing the job
👉 Subscribe for More Automotive Tutorials: [Your Channel Link]
🔔 Turn on notifications so you never miss a new video!
#C6Corvette #StarterRemoval #RoutineMaintenance #DIYCarRepair #CorvetteMaintenance #AutomotiveTutorial
Переглядів: 42
Відео
Replace Water Pump - C6 Corvette
Переглядів 23День тому
Are you a proud owner of a C6 Corvette and looking to save money on maintenance? In this step-by-step tutorial, we'll show you how to remove and replace the water pump on your Corvette right at home. This easy DIY project is perfect for car enthusiasts who want to take matters into their own hands and keep their ride running smoothly without breaking the bank. What You'll Learn: Tools and mater...
ATI Super Damper Bench Assembly for LS2 C6 Corvette
Переглядів 3614 днів тому
Torque Test Channel: ua-cam.com/video/V1Y3aB94lwU/v-deo.html Learn how to assemble the ATI Super Damper for your 2007 LS2 C6 Corvette in this step-by-step guide. We'll walk you through the entire bench assembly process, including attaching the AC pulley to the hub and preparing the damper for installation. Whether you're a seasoned mechanic or a DIY enthusiast, this detailed tutorial will help ...
C6 Corvette Harmonic Balancer Removal
Переглядів 7721 день тому
Get ready to remove and replace your car's harmonic balancer with our detailed, step-by-step preparation guide. We'll walk you through the entire process, from disconnecting the battery to using a Chrysler-style puller to remove the harmonic balancer. Perfect for DIY mechanics and car enthusiasts looking to tackle this complex job on their own. 🔧 Topics Covered: Preparation for harmonic balance...
Maximize Garage Storage with GL1 - No More Ladders!
Переглядів 61Місяць тому
Don't miss out! Shop now and use code 'FM525005' to get the GL1 for just $170.99. amzn.to/3YlLabV Discover the ultimate solution for efficient and safe garage storage with the Fleximount GL1 shelf. Save time and enhance your safety by eliminating the need to climb ladders. This easy-to-use shelf helps you make the most of your garage space, allowing you to utilize dead space effectively. Say go...
Remaking a Bracket With SendCutSend
Переглядів 522 місяці тому
Join us as we remake a custom fire extinguisher bracket for the Element 50 using Fusion 360. Watch step-by-step as we design the bracket, upload it to SendCutSend for manufacturing, and install the newly crafted piece. Key Topics Covered: Revisiting and improving an old fire extinguisher bracket design Detailed Fusion 360 tutorial for creating custom designs Uploading and ordering your design f...
Porsche 987.1 Maintenance & Trackday Prep
Переглядів 1023 місяці тому
Porsche 987.1 Maintenance & Trackday Prep
C6 Corvette Fire: Safety Upgrades & Trackday Prep 😱
Переглядів 2023 місяці тому
C6 Corvette Fire: Safety Upgrades & Trackday Prep 😱
C6 Sets Personal Record Despite Challenges - VIR
Переглядів 913 місяці тому
C6 Sets Personal Record Despite Challenges - VIR
Upgrade: New Sound For The C6 Corvette
Переглядів 1144 місяці тому
Upgrade: New Sound For The C6 Corvette
Calling out @RyanWyke and @LockOnAutosport at VIR
Переглядів 774 місяці тому
Calling out @RyanWyke and @LockOnAutosport at VIR
How to Make a Race Quip Seat Fit in a C6 Corvette
Переглядів 855 місяців тому
How to Make a Race Quip Seat Fit in a C6 Corvette
This senor killed my cruise control! - C6 Corvette
Переглядів 1706 місяців тому
This senor killed my cruise control! - C6 Corvette
NASA SE HPDE 2 - C6 Corvette at CMP | Day 2
Переглядів 326 місяців тому
NASA SE HPDE 2 - C6 Corvette at CMP | Day 2
Looks like its not going anywhere
@@Niijii802 can confirm. Did not go anywhere.
This is on another level of “I’m a dumbass” 😂
But a safe dumbass!
very solid
@@bonkz30 I don’t do many things well but I can strap an aerator to a uhaul truck well.
i have this problem,i believe the float switch is stuck or defective,this makes the macine think its fuul of water although its not,going to find a video that shows how to replace float switch
@@dorothypaprocki3487 that wasn’t my issue. High use caused water to leak through a small hole and saturate a sensor.
Yes so cheap ashamed GM
oh well. my center armrest latch is broke now too. not replacing it though
Always remember “not your horse, not your barn” and I promise you won’t give a fuck anymore 😂. But I feel this too 😅
@@MrZaine97 I don’t care that he likely has curb rash. Just thought it was funny
Well done, started doing straps like this and my wife says I've never been sexier. Thank you for improving my strap storage and marriage.
@@CletusEinstein hahahahah. Nice
VMS lowering bolts are terrible!!! After 1 year of doing the replacement with brand new VMS bolts that have the swivel ends and they creek and squeak like crazy. They literally made me embarrassed to park the car at low speeds cause it sounded like a shitty old car. Replaced them just recently with new solid bolts and good as new.
@@OrpheussZ06 I’ve had no issues with mine. Thanks for your comment
Same issue and it was my turbidity sensor that was filthy. I cleaned it from the inside because I was chasing the problem for 6 hours and had it completely apart, but you can simply pull it from underneath, clean it, and pop it back in. Now I do it once a year and haven't had any issues since.
@@KatandJoesTube nice! The pin whole in my tub only leaks when I do back to back loads.
Didn't work. Guess I didn't "snug it up" or whatever
@@shasidfir it took one a try off camera before it worked right for me. Just like anything it takes practice
how are you liking this rack ? I have a sedan with a 1.25 inch receiver and bought a 1 up Quick bike rack. While I love the rack, the mount into the hitch, doesn't utilize a thru pin, but rather just ball expansion the you expand by tightening a screw in front of the hitch. I'm just not sure of that , feel little sscared not having through pin. Does this thru pin also have a lock?
This rack has the ball to remove slop, and a provision for pin to prevent it from sliding out. Have had 2 road bikes on it traveling plenty fast with zero concerns. You can buy any "locking hitch pin" and you'll have the ability to have a lock on the pin. I personally don't see the value. if someone wants my bike they're going to take it.
I’m curious has anyone else messed up the process and the car unlearned the key fobs?
@@BrianLevi-cl2ek I haven’t had that happen
This looks like one of the few seats that will fit me, but I'm now concerned about the thread issues
@@Map1eMamba that’s valid. I’m 6’ 235 with 35” pants and 48” chest. As for the thread issues, I wouldn’t hesitate to buy this seat again. I also have a Race Quip size L (have another vid on this one) and it is a little easier to fit into, but a smidge bigger. If I wore a hoodie it would fit the same as my Sparco.
Had to go and redo all my straps! Thanks
@@kataskatowski5740 makes thing a soo much easier!
Yo what's the link fir the tool
www.amazon.com/gp/product/B0BZJPLY8B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Wait those arnt actual weights that's just rubber right? No way that really created a wobble, really??
2.2 ouces of rubber.
Huh?
@@patheticprepper4496 rubber from the tire shears off under high load on the track. Gets caught everywhere. Causes wheel to be unbalanced.
Thats so unbelievable! Cool af man 🗣@Jordan.Is.Novice
@@jannishansoonn Thanks!
Dam lol 😂👍 yep that will do it!
I solve the issue using Fan blowing for 1 day. Thank you for sharing it.
That dries it out, but doesn't solve the problems.
Leettus sounds excellent vs. the M6... But the range of the Leettus seems weak. M6 has better distance range
@@thedragonb just determined by your use case. UA-cam vid in short distances or longer distance videos. I have just bought a better mic that doesn’t have to have the receiver plugged into my phone. The receivers that do are very delicate. I broke 2 just by dropping my phone on table.
@@Jordan.Is.Novice So you now have a mic that is straight bluetooth with no receiver? What is the brand and how do you like it? Will you do another video for your new one as well?
At the beach 🚬😎
@@goz7569 that’s the equivalent as “uhhh Earth”
Nope. I’ve got a wall mounted AC unit in the garage for just such issues.
@@robv5834 not sure I’ve got the power req to do this.
@@Jordan.Is.Novice really? Mine uses a standard outlet. Now it’s not cold in my garage. But it’ll cut you from 95 to 80-85 which makes it much more manageable. I also added some insulation to the garage door itself. GL man, it’s hot here.
I put a window a/c unit in my garage for if i need to be in there awhile. Best shit ever.
@@inferno350z nice!
@@Jordan.Is.Novice i only mention because you have a window 😂
94 degrees?
Yes
Idk
@@ItzSkitzooo close
@@Jordan.Is.Novice fr?
Virgina
@@KimzCourt-xj4rn nope
I’ve Done it to 1 1/8 socket on one of those impacts
@@_-_-_Ghost_-_-_1234 $hit happens when you party naked man.
Yeah, it’s a Pittsburgh. That’s how.
@@heylloh my 19 and 21 mm have been hard at it for 10 years. Rounded a bit but still solid.
Welcome to Australia...
@@thedevilsadvocate3577 never been, but would love to!
It was 120 degrees in Vegas the other day
@@cb8426 it was 98 and heat index 109 the day of this video
Can anyone else relate to working in a lead smelt factory in 175°heat with a tyvek suit on and a cloak and shroud?
Ohhh don’t forget the respirator that makes your face melt off
@@davidwalton4162 does the dryer section of a paper mill count? 145° and 95% humidity.
104 in my house for two days now … unbearable
@@ivermectin3191 inside the living space?!??? Ugh. I’d go visit somewhere not there.
See, your problem was that you didn’t use enough black spray paint.
@@yaboicro7716 why does everyone think these aren’t impact? 20 year old Harbor Freight impact socket.
A/c in summer heater in winter. Wake up
inside the house, yes. Not in the garage. I wish.
94?!? That’s practically winter!! 😂😂
Come on out then.
Stop cutting it
if only. This happened trying to remove the crank bolt on my LS2
100.00 window ac unit from Walmart will fix that or craigslist used on 50 bucks
don't have power at the one window in the garage. no insulation really either.
Come lay some asphalt in SoCal it’s 122f / 50c
Nah. I'm good.
I would love to live in an area that just had sun heat, but no, I just have to live on the East Coast and suffer 105° weather with 80+ percent humidity. If You’re just straight heat with no humidity please quit your Bitchin 😂😂
Hot is hot. At least with the dry heat you can use a misting spray to help with evaporative cooling. In the SE you just get wet and hot.
Well, for the vast majority of us that have to work on our cars outside no, we cannot understand what it’s like to work inside of a garage😂😂😂😂
Just think of it this way, outside you can have a breeze.....
In the southwest it hots hot to it sucks.
For sure. Someone always has it worse, but still doesn't make it fun.
@@Jordan.Is.Novice I don't think it's worst. Where at isent it more sticky? As hotter?
Arizona here. Today it was 115 outside and my 2 ton mini split kept the garage around 75 😅
@@MotorheadLars would love to have HVAC in garage
😂 come lay some shingles on the roof and then talk to me
Nah brah. I'll stay in my AC office. I can't be doing that $hit. Real talk want to spend like a month with different trades just to learn skills.
@@Jordan.Is.Novice I been doing it for 10 years probly got another 10 in me then I'll switch with you and get me an AC office job 😄. It's really good money for now tho $$$
If you're gonna be stupid, you had better be tough.
@@biggiebaby3541 that's a great song 🎸
Try AZ
Spent 6 months in ABQ, handful of weeks in PHX for work. I will never visit there in summer for fun.
Yes, I have two air conditions. I spent my money on and I am very comfortable. I don’t allow my wife to tell me now because if I don’t, I’ll die.😂😂😂😂
Future goal: 40x60 shop, small loft, 2 mini splits, boiler for heated slab.
It’s 95 in Ohio ! And humid deal with it 😂
@@toddbaumgartner8946 lol. Humid in OH. Child please.
106 real feel here in Delaware, 110 in my garage 🥵🥵
@@Wiseman189 how is your garage hotter than bulb air temp? Is your garage in an attic?
I live in Yuma sooo yeah
@@SpaceForceRecon at least it’s a dry heat…
“It’s not the heat that gets ya…”
@@xtratrstrl403 today with some rain it got to 87%
I work over 60 hours a week in heat similar to that with higher humidity as many people do. Complaining about doing a weekend project in it makes you look weak!
@@phillhuddleston9445 oh nooooooo. I’m such a wuss